TIANCHI horse ultrasound machine TC-300 Manufacturer in KM
TIANCHI horse ultrasound machine TC-300 Manufacturer in KM
Operation Procedure
1) Start the device
Switch on the power switch, the power indicator on the panel turns on, and the startup screen shows. Press any key(FREEZE and RESET), enter the state of scanning. Adjust the display brightness, contrast and overall gain knob to acquire a satisfying visual effect.
Tip: LCD display effect has a high correlation with view angle, operator should adjust view angle suitably.
Caution:
The heat radiating holes cannot be covered otherwise the device would be damaged due to over hot.
2)Diagnosis
Apply an amount of medical ultrasound Gel to the diagnostic part of patient body, then press the acoustical window of the probe on the part closely. The cross-section acoustic image of tissues will be displayed on the screen, move the probe properly to locate the optimum position for the detecting depth; meanwhile, adjust the overall gain, near field gain, far field gain or concentrate the focus to acquire an optimal cross-section acoustic image of the diagnostic part.
Note:
1. When pressing the probe on patient body, do not overexert in case that the probe be broken or the patient feel discomfort.
2. It is necessary to use a probe suitable for the diagnostic part and a correct frequency for diagnoses.
Company:Henan Tianchi Instrument Equipment Co.,Ltd.
Tel:+86-371-56788280 +86-18903712477
Fax:+86-371-65715725
E-mail:tianchi-demi@ln2container.com
Website:www.globalliquidnitrogentank.com
Twitter:TC18903712477
Facebook:18903712477
what's app:tianchiydg
QQ:648486900
Model:TC-300
Probe:7.5MHz Linear Probe/6.5MHz Linear Rectal Probe/3.5MHz Convex Probe/5.0MHzMicro-convex Probe
Monitor:5.0 inch TFT-LCD
Display modes:B,B+B,B+M,M,4B
Gray scales:256
Image permanent storage:64 frames
Cine-loop:≥400 frames
Scanning depth:70mm-240mm
Image conversion:up/down,left/right
Body marks:16
Image process:Faked color,gray calibration,image smooth and histogram.
Frequency adjustment:3
Frame correlation adjustment:Support
Measuring functions:Distance,circumference,area,volume,EF rate
Comment:date&time,name,PID,sex,age,doctor,Pasture,annotation
Output report:Support
Output enterface:USB2.0;Video(PALD, NTSC)
Time to empty:>3 hour
Size:Length(230mm)*Width(120mm)*Depth(38mm)
Weight:700g
Cleaning
1.When the enclosure needs cleaning, wipe it with soft dry cloths and then wipe gently with sponge dipped with 75% medical alcohol .
1) Warning:
To prevent accidents, take out the battery when cleaning the main unit enclosure and separate the device from the power supply network first and then clean the adapter enclose.
Prevent all the plugs, sockets from water splash or socking.
2) Warning:
Do not use extender, ethylene oxide or any other organic solvent which will deface the probe's protective foil.
Keep the device and probe from any types of liquid infiltration.
Do not clean the device or probe by air or heating.
Caution:
1) Please refer to instructions prescribed by the manufacturer closely when using detergents.
2) Be careful with cleaning of the display. Please wipe it with dry soft cloth because it is very easy to scratch and spoil.
3) Please do not clean the inner base of the device.
4) Please do not place the device in liquid.
5) Do not leave any detergent on the device surface.
6) Though there will be no chemical reaction between the device enclosure and most of those detergents, We still suggest no detergent in cleaning in case the device surface be spoiled.
Operation Procedure
1) Start the device
Switch on the power switch, the power indicator on the panel turns on, and the startup screen shows. Press any key(FREEZE and RESET), enter the state of scanning. Adjust the display brightness, contrast and overall gain knob to acquire a satisfying visual effect.
Tip: LCD display effect has a high correlation with view angle, operator should adjust view angle suitably.
Caution:
The heat radiating holes cannot be covered otherwise the device would be damaged due to over hot.
2)Diagnosis
Apply an amount of medical ultrasound Gel to the diagnostic part of patient body, then press the acoustical window of the probe on the part closely. The cross-section acoustic image of tissues will be displayed on the screen, move the probe properly to locate the optimum position for the detecting depth; meanwhile, adjust the overall gain, near field gain, far field gain or concentrate the focus to acquire an optimal cross-section acoustic image of the diagnostic part.
Note:
1. When pressing the probe on patient body, do not overexert in case that the probe be broken or the patient feel discomfort.
2. It is necessary to use a probe suitable for the diagnostic part and a correct frequency for diagnoses.
Company:Henan Tianchi Instrument Equipment Co.,Ltd.
Tel:+86-371-56788280 +86-18903712477
Fax:+86-371-65715725
E-mail:tianchi-demi@ln2container.com
Website:www.globalliquidnitrogentank.com
Twitter:TC18903712477
Facebook:18903712477
what's app:tianchiydg
QQ:648486900
Model:TC-300
Probe:7.5MHz Linear Probe/6.5MHz Linear Rectal Probe/3.5MHz Convex Probe/5.0MHzMicro-convex Probe
Monitor:5.0 inch TFT-LCD
Display modes:B,B+B,B+M,M,4B
Gray scales:256
Image permanent storage:64 frames
Cine-loop:≥400 frames
Scanning depth:70mm-240mm
Image conversion:up/down,left/right
Body marks:16
Image process:Faked color,gray calibration,image smooth and histogram.
Frequency adjustment:3
Frame correlation adjustment:Support
Measuring functions:Distance,circumference,area,volume,EF rate
Comment:date&time,name,PID,sex,age,doctor,Pasture,annotation
Output report:Support
Output enterface:USB2.0;Video(PALD, NTSC)
Time to empty:>3 hour
Size:Length(230mm)*Width(120mm)*Depth(38mm)
Weight:700g
Cleaning
1.When the enclosure needs cleaning, wipe it with soft dry cloths and then wipe gently with sponge dipped with 75% medical alcohol .
1) Warning:
To prevent accidents, take out the battery when cleaning the main unit enclosure and separate the device from the power supply network first and then clean the adapter enclose.
Prevent all the plugs, sockets from water splash or socking.
2) Warning:
Do not use extender, ethylene oxide or any other organic solvent which will deface the probe's protective foil.
Keep the device and probe from any types of liquid infiltration.
Do not clean the device or probe by air or heating.
Caution:
1) Please refer to instructions prescribed by the manufacturer closely when using detergents.
2) Be careful with cleaning of the display. Please wipe it with dry soft cloth because it is very easy to scratch and spoil.
3) Please do not clean the inner base of the device.
4) Please do not place the device in liquid.
5) Do not leave any detergent on the device surface.
6) Though there will be no chemical reaction between the device enclosure and most of those detergents, We still suggest no detergent in cleaning in case the device surface be spoiled.
