TIANCHI types of ultrasound machines TC-302 Manufacturer in CH
TIANCHI types of ultrasound machines TC-302 Manufacturer in CH
Animal B ultrasound is a kind of ultrasonic imaging method,which uses B ultrasound probe to transmit ultrasonic waves,at the same time receiving the ultrasonic that reflected by various tissues and displayed on a specific display to form an image.The animal b ultrasound producted by Tianchi has obvious imaging,and there is no excessive clutter interference,people can use it without special operation training,it is convenient and accurate
Company:Henan Tianchi Instrument Equipment Co.,Ltd.
Tel:+86-371-56788280 +86-18903712477
Fax:+86-371-65715725
E-mail:tianchi-demi@ln2container.com
Website:www.ln2container.com
Twitter:TC18903712477
Facebook:18903712477
what's app:tianchiydg
QQ:648486900
Model:TC-302
Probe:Waterproof Probe
Measuring distance:4-35mm
Resolution:1mm
Precision:±1mm
Back fat layer:3 layer
Size:180mm*73mm*30mm
Weight:320g
Power Dissipation:0.05W
General tips for device operation
In operation
1. Heat radiation holes are strictly prohibited to be covered.
2. After shutdown, do not restart the device within 2 - 3 minutes.
3. Scanning should be stopped immediately and the device be shut down if any abnormal case is found.
4. Do not touch any parts of the device excluding application part.
5. Touch the key softly.
After operation
1. Power off the device.
2. Pull out the plug from power supply socket instead of pulling the cable.
3. Clean off the couplant on the probe with soft medical sterilized cotton ball.
Installation and disassembly
Connection between probe and main unit
Probe jack lies in the top of the right side, insert the probe into the jack correctly and turn it clockwise and wound it. There is only one probe jack which can be connected to all the supported optional probes.
1) Warning:
Avoid by all means unplugging or plugging the probe connector at state of log on in case the probe and main unit be damaged. Once the probe is connected with the main unit, do not unplug nor plug it at discretion in case poor contact happen.
2) Warning:
Must not touch the contact pin of the probe connector.
3) Warning:
The probe should be protected from felling off or crashing and the manufacturer assumes no responsibility for this kind of hazard.
4) Warning:
Please handle the device carefully.
Henan tianchi is a professional manufacturer of B ultrasound machines.We developed full digital doppler ultrasound diagnosis system independently.The company has completely independent intellectual property rights, unparalleled ultrasound imaging technology.In addition, we also provide free warranty for two years (except for man-made faults), and provide life-long maintenance services.
Animal B ultrasound is a kind of ultrasonic imaging method,which uses B ultrasound probe to transmit ultrasonic waves,at the same time receiving the ultrasonic that reflected by various tissues and displayed on a specific display to form an image.The animal b ultrasound producted by Tianchi has obvious imaging,and there is no excessive clutter interference,people can use it without special operation training,it is convenient and accurate
Company:Henan Tianchi Instrument Equipment Co.,Ltd.
Tel:+86-371-56788280 +86-18903712477
Fax:+86-371-65715725
E-mail:tianchi-demi@ln2container.com
Website:www.ln2container.com
Twitter:TC18903712477
Facebook:18903712477
what's app:tianchiydg
QQ:648486900
Model:TC-302
Probe:Waterproof Probe
Measuring distance:4-35mm
Resolution:1mm
Precision:±1mm
Back fat layer:3 layer
Size:180mm*73mm*30mm
Weight:320g
Power Dissipation:0.05W
General tips for device operation
In operation
1. Heat radiation holes are strictly prohibited to be covered.
2. After shutdown, do not restart the device within 2 - 3 minutes.
3. Scanning should be stopped immediately and the device be shut down if any abnormal case is found.
4. Do not touch any parts of the device excluding application part.
5. Touch the key softly.
After operation
1. Power off the device.
2. Pull out the plug from power supply socket instead of pulling the cable.
3. Clean off the couplant on the probe with soft medical sterilized cotton ball.
Installation and disassembly
Connection between probe and main unit
Probe jack lies in the top of the right side, insert the probe into the jack correctly and turn it clockwise and wound it. There is only one probe jack which can be connected to all the supported optional probes.
1) Warning:
Avoid by all means unplugging or plugging the probe connector at state of log on in case the probe and main unit be damaged. Once the probe is connected with the main unit, do not unplug nor plug it at discretion in case poor contact happen.
2) Warning:
Must not touch the contact pin of the probe connector.
3) Warning:
The probe should be protected from felling off or crashing and the manufacturer assumes no responsibility for this kind of hazard.
4) Warning:
Please handle the device carefully.
Henan tianchi is a professional manufacturer of B ultrasound machines.We developed full digital doppler ultrasound diagnosis system independently.The company has completely independent intellectual property rights, unparalleled ultrasound imaging technology.In addition, we also provide free warranty for two years (except for man-made faults), and provide life-long maintenance services.
