|
|
|
|
|
|
|
|
TIANCHI swine ultrasound equipment TC-300 Manufacturer in LV
|
|
TIANCHI swine ultrasound equipment TC-300 Manufacturer in LV
Tianchi swine ultrasound equipment uses the light touch key,it is easy to operate,convenient to carry and with high accuracy,displaying by super large screen.It is suitable for the diagnosis of pigs, horses, cattle, sheep, cats, dogs and other animals.The B ultrasound produced by Tianchi can realize real-time,freeze,store,callout,flip up and down, flip left and right and large-capacity movie playback of the image.It has the functions of multi-level scanning depth, dynamic range, frame correlation coefficient adjustment and focus number, and focal position adjustment.
Company:Henan Tianchi Instrument Equipment Co.,Ltd.
Tel:+86-371-56788280 +86-18903712477
Fax:+86-371-65715725
E-mail:tianchi-demi@ln2container.com
Website:www.cntianchiyiqi.en.alibaba.com
Twitter:TC18903712477
Facebook:18903712477
what's app:tianchiydg
QQ:648486900
Power Supply
The device provides two automatic switch-over modes to supply power: adapter and built-in battery.
1) Power supply with adapter
1. Check the input power cord plug of the adapter to see whether it matches the EPS outlet.
2. Check the EPS to see whether it is in the specified range and the power cord to see whether it is connected well.
3. Check the adapter to see whether it works well: Plug the power cord into the AC input outlet, switch on the power switch of the outlet, if the DC output indicating light turns on green, it works well.
4. Shut the power switch of the outlet.
5. Insert the DC output plug of the adapter into the DC14V outlet in the right side of the device, switch on the outlet.
6.Switch on the main unit, the device is available now.
2) Power supply with battery
1. Install the battery correctly into the main unit.
2. Push down the main unit power switch to power on the main unit, the power indicator will turn on.
3. The device can start operation.
Note:
When the main unit under-voltage indicator turns into red, it means the battery is running up and needs charging.
Warning:
It is prohibited to use any other power supply except the standard adapter as the
external power supply for the main unit.
Battery Charging
1. Install the battery correctly into the main unit.
2. Insert the plug of output DC14V/3A of the adapter into the DC14V interface on the side.
3. Connect power cord of "Input AC220V,50Hz" of the adapter to the EPS. <0.
4. No matter the main unit is power on or shut down, when the "under-voltage" indicator flickers, the adapter is charging the battery; When the "under-voltage" indicator turns off from flickering, the battery is fully charged.
Operation Procedure
1) Start the device
Switch on the power switch, the power indicator on the panel turns on, and the startup screen shows. Press any key(FREEZE and RESET), enter the state of scanning. Adjust the display brightness, contrast and overall gain knob to acquire a satisfying visual effect.
Tip: LCD display effect has a high correlation with view angle, operator should adjust view angle suitably.
Caution:
The heat radiating holes cannot be covered otherwise the device would be damaged due to over hot.
2)Diagnosis
Apply an amount of medical ultrasound Gel to the diagnostic part of patient body, then press the acoustical window of the probe on the part closely. The cross-section acoustic image of tissues will be displayed on the screen, move the probe properly to locate the optimum position for the detecting depth; meanwhile, adjust the overall gain, near field gain, far field gain or concentrate the focus to acquire an optimal cross-section acoustic image of the diagnostic part.
Note:
1. When pressing the probe on patient body, do not overexert in case that the probe be broken or the patient feel discomfort.
2. It is necessary to use a probe suitable for the diagnostic part and a correct frequency for diagnoses.
Henan Tianchi is a manufacturer specializing in the production of animal B ultrasound.The product TC ultrasonic system is derived from the latest generation of digital system structure and can provide high quality two-dimensional images.Compared with the traditional desktop and portable black-and-white b ultrasound, the handheld b ultrasound is more small and convenient.Animal b ultrasound is favored by livestock industry because it is easy to carry and has high accuracy.
|
|
|
|
|
|
|
|
|
|
